How is the tensile strength of polypropylene POY filament tested? And what is the relationship between it and post-processing?

Published: [2026/11/10] Views: [12]

How is the tensile strength of polypropylene POY filament tested? And what is the relationship between it and post-processing?


Tensile strength is a core indicator of polypropylene POY filament, including two items: breaking strength and breaking elongation. It directly reflects the fiber's ability to withstand tension and its deformation characteristics. It is not only a basis for judging the quality of the raw material but also profoundly affects the stability of subsequent processes such as drawing, elastic treatment, and weaving.


Testing method for tensile strength


Before testing, the sample needs to be placed in a standard environment for moisture adjustment to eliminate the interference of temperature and humidity. Then, representative filament samples should be selected, avoiding the damaged or abnormal parts on the surface of the roll. The testing equipment uses a dedicated strength testing machine, clamping the sample according to the standard, ensuring that the clamping position does not slip or cause damage to the filament. The equipment applies force uniformly until the filament breaks, simultaneously recording the force and deformation process to obtain corresponding strength and elongation data.


To ensure reliable results, multiple parallel test samples are required for each sample, with abnormal data excluded, and the average value is calculated. During the testing process, attention should be paid to the location of filament breakage, distinguishing whether it is a body breakage or a clamping opening breakage, to avoid data distortion. At the same time, the morphology of the broken filament can be observed to assist in judging the stability of the spinning process.


The relationship between tensile strength and post-processing


Polypropylene POY is a pre-oriented filament. It needs to undergo subsequent drawing and shaping processes to become the finished filament. Its tensile strength state is essentially an external manifestation of the previous orientation and crystallization degree.


If the breaking elongation is high, it indicates that the internal orientation degree of the fiber is low, and there is sufficient drawing space for the subsequent drawing process, but the processing tension is more likely to fluctuate, and filament slippage is more likely to occur during the drawing process, making it more difficult to control the uniformity of the finished product indicators. If the elongation is low, it indicates a higher pre-orientation degree, and there is insufficient drawing allowance, making the post-processing tolerance space small. If not careful, it is easy to cause filament breakage, fuzziness, and increase the scrap rate.


The strength also needs to be maintained within a reasonable range. A balanced POY filament with high tensile strength has stable post-processing tension, uniform drawing, and better consistency of tensile strength in the finished product, and the roll formation is regular. A tensile strength with a large dispersion of raw materials will show inconsistent performance in the processing of the same batch of filaments, easily causing color differences and material properties variations, affecting the downstream weaving process.


Key points of production control


Tensile strength is not necessarily better with higher or lower values. The key is to have stable indicators and small dispersion. In the spinning process, the spinning speed, cooling, and oiling processes are adjusted to control the orientation level of POY, thereby stabilizing the tensile strength indicators. After receiving the raw materials, downstream processing enterprises should prioritize the inspection of tensile strength, and then match the corresponding drawing process. When necessary, adjust the temperature, speed, and tension parameters to adapt to the characteristics of the raw materials, reducing post-processing abnormalities and ensuring the stability of the final product quality.